RRB_1.png
RRB_2.png
RRB_1.png
RRB_2.png

Repeat Drive Brushed Mk2 3mm Shaft

$18.99
Sold Out

Drop in replacement for NE kits.

Repeat brushed drive yields just the right balance between durability, power, and cost for most ant weight combat robots. Known to keep ticking well past their expiration date, don’t miss this opportunity to give your robot a massive upgrade!

  • Custom wound 030 brushed motor

  • 2s-4s rated voltage

  • 16mm, 22.6:1 all metal planetary gearbox

  • 3mm “D” extra long output shaft (cut to length)

  • 26g weight

  • 10.5mm M2 Face mount hole pattern

  • 12V input (3S)
    – 1220rpm free speed
    – 2A stall current
    – 1187 g.cm stall torque
    – 3.72W max power output

  • 7.4V input (2S)
    – 752rpm

  • 14.8v input (4S)
    – 1504rpm

https://grabcad.com/library/repeat-drive-brushed-1

Get notified if it's available
Add To Cart

Drop in replacement for NE kits.

Repeat brushed drive yields just the right balance between durability, power, and cost for most ant weight combat robots. Known to keep ticking well past their expiration date, don’t miss this opportunity to give your robot a massive upgrade!

  • Custom wound 030 brushed motor

  • 2s-4s rated voltage

  • 16mm, 22.6:1 all metal planetary gearbox

  • 3mm “D” extra long output shaft (cut to length)

  • 26g weight

  • 10.5mm M2 Face mount hole pattern

  • 12V input (3S)
    – 1220rpm free speed
    – 2A stall current
    – 1187 g.cm stall torque
    – 3.72W max power output

  • 7.4V input (2S)
    – 752rpm

  • 14.8v input (4S)
    – 1504rpm

https://grabcad.com/library/repeat-drive-brushed-1

Drop in replacement for NE kits.

Repeat brushed drive yields just the right balance between durability, power, and cost for most ant weight combat robots. Known to keep ticking well past their expiration date, don’t miss this opportunity to give your robot a massive upgrade!

  • Custom wound 030 brushed motor

  • 2s-4s rated voltage

  • 16mm, 22.6:1 all metal planetary gearbox

  • 3mm “D” extra long output shaft (cut to length)

  • 26g weight

  • 10.5mm M2 Face mount hole pattern

  • 12V input (3S)
    – 1220rpm free speed
    – 2A stall current
    – 1187 g.cm stall torque
    – 3.72W max power output

  • 7.4V input (2S)
    – 752rpm

  • 14.8v input (4S)
    – 1504rpm

https://grabcad.com/library/repeat-drive-brushed-1

  • 12V input (3S)
    – 1220rpm free speed
    – 2A stall current
    – 544 g.cm stall torque
    – 1.7W maximum power output

  • 7.4V input (2S)
    – 752rpm

  • 14.8v input (4S)
    – 1504rpm

CAD Model

These gearboxes can only accept ~2mm of face screw engagement. Using screws that are too long will result in damage.